One perk of getting your home security system installed by trained experts is that you rarely find a reason to worry about it. However, there may be a few instances when you need to reset your alarms in Fort Collins. If you’re utilizing a smart command hub, a reset typically takes a few minor tap of a button after occurrences like battery changes, power outages, and false alarms.
Consult Your Owner’s Manual Before Trying to Reset Your Alarm Panel
A word to the wise before you try to reset your Fort Collins home security system, check your instruction manual ahead of time. You wouldn’t want to undermine your home’s protection because you hit the wrong button. In addition, control panels may have changed if you moved from a number pad to a fully digital system. If there’s ever a time when you can't reset your system, don't hesitate to reach out to your trusted security specialists.
Resetting Your Fort Collins Security System Because Of A False Alarm
Typically, a false alarm happens due to the accidental tripping of a sensor. You may use the ADT Command touchscreen or bring up your ADT security app and tap the shield option and enter your security code to switch off the system in these situations. You could receive notification from your 24-hour monitoring specialists, but just let them know it was a false alarm.
Resetting Your Alarm After A Power Outage In Fort Collins
If power is lost due to lighting, strong winds, or other reasons, you may start to hear a beeping sound from your alarm’s central interface. This signifies that your security is being powered by the battery backup. To reset your equipment and stop the steady beeps, you need to take steps to disarm and rearm your security.
But please note, if power is out for prolonged time frame, you may need a total system reset. Pay careful attention to the instructions in your user’s handbook -- normally by putting in your PIN number and tapping the on/off button twice -- and you should be back in business. You may still hear the auxiliary power beeping, as it might not cease until the battery charges entirely. Contact your security technician if you are still having problems with your ADT system a day after the power is resumed.
When You Need To Reset Your Home Security System After Replacing A Battery
Occasionally you need to replace a battery in one of the devices in your security installation. In order to accomplish this, you will set your system to test mode so you prevent setting off an accidental alarm. Once the you replace the old battery, remove the alarm panel from Test Mode and resume normal operations. If the command center doesn't recognize the component or the battery indicator stays on, you may need a full reset of your security system.
Reset Your Fort Collins Security System Following The Addition Or Deletion Of A User
Removing or adding users can be done on the ADT Command panel and your ADT smartphone app. You won’t need a resetting of your system following the addition or deletion of a user or code. With that being said, if you relocate to a new house that already has an ADT system, you'll want to contact your residential security experts at (970) 316-5674 to establish a new contract. The installation tech will go on site to upgrade outdated parts, place additional devices (as required), and do a factory reset.
An Easy-To-Use Security System Is The Right Choice
Resetting a home security system in Fort Collins can be difficult if it fails to include clear devices and controls. If you would like to get your intuitive home security system, contact (970) 316-5674 or send in the form below. We’ll be happy to design the ideal security system for your residence.